Overview

Ronseal Kitchen and Bathroom Sink, Bath, Appliances Touch-Up Enamel covers chips and groves in enamel, porcelain, acrylic, fibreglass and appliances. An easy to use system with everything you need to touch up your sink, toilet or bath.

• Can be used on flaws, scratches, chips, defects and minor damage
• Waterproof finish
• Leaves a long lasting smooth white finish
• Suitable for porcelain, acrylic, fibreglass and appliances

Preparation

Always make sure the area to treat is clean, dry and free from any loose material.

• Test the colour of the enamel on a small hidden area to ensure you are happy with the colour match.
• Lightly sand the damaged area and wipe down with a damp cloth.
• Leave to dry before commencing.

Application

We recommend always following the manufacturer's instructions found on the tin. Shake thoroughly, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.

• Shake the bottle for two minutes before use.
• Brush on the first coat.
• Allow 2 hours for it to dry.
• Apply another 1-2 coats, leaving 2 hours between each.
• The area will be touch dry in 1 hour, please wait 24 hours before getting it wet.
• Allow to dry for four days before submerging the area in water.
• Once the repaired area is completely dry, you can clean it as normal.

Aftercare & Storage

Regularly inspect the area for any additional chips or scratches. If you notice any, you just need to clean the area and apply another coat.